User`s manual
14
TROUBLESHOOTING
Go through this section if you experience difculty in operating
Kidizoom
®
Plus.
Problem Solution
Program stops
working
1. Press the Reset button with a paper clip. If this
does not solve the problem, please continue to
the following steps.
2. Please make sure the camera is OFF
.
3. Interrupt the power supply by removing the
batteries.
4. Let the camera sit for a few minutes without
batteries, then replace the batteries.
5. Turn the unit
ON. The unit should now be ready
to play again.
6. If the unit still does not work, replace the
batteries with an entire set of new batteries.
Image taken is not
clear
Check the camera lens protection window is
clean.
Display on
Kidizoom
®
Plus
LCD does not
turn on
1. Make sure there are 4 “AA” batteries in the
camera. Hold the ON/OFF button for 2 seconds
to turn it on.
2. Make sure the camera is not connected to a TV
with the A/V cable.
3. Make sure the camera is not in power saving
mode. Press the ON/OFF button for 2 seconds to
turn it on.
There is no
picture on the TV
screen
1. Make sure that there are batteries in the camera
and that the TV is plugged into a power outlet.
2. Make sure that the camera is turned
ON and
the TV is turned ON.
3. Check the connections on the A/V cable
between the camera and the TV and review
the appropriate connection procedure in this
manual.
4. Make sure that all cable plugs are securely
inserted into the appropriate ports.
5. Make sure that the TV is tuned to the appropriate
input channel.
Troubleshooting