User Guide

2
Getting Started
1. ATTACH ADVENTURE PACK
• Make sure the unit is turned OFF.
• If there is already an Adventure Pack attached, you may
remove it by pressing up on the Adventure Pack lock (see
picture at right).
• Slide the Quiggle Caper Adventure Pack into the main unit
as shown below.
• Press firmly until the Adventure Pack is locked into place by the lock at the top
of the unit.
2. SUPPLY POWER
• Insert 4 C (UM-2/LR14) batteries into the battery compartment
on the back of the main unit.
• Power can also be supplied through a 9V 300mA AC center-
positive power adaptor (sold separately).
3. PRESS THE ON BUTTON
4. TYPE YOUR NAME
• At the voice prompt “What’s your name?” please type your name using the
keyboard.
• Use the Erase key to correct mistakes.
• When you are finished typing your name, press the Enter key.
• The Adventure Pack will scroll to the title screen to start the new adventure. It
will keep your name in its memory until the Voyager Adventure Station is turned
off.
(1) (2) (3)
48452 i/m 5.17 11/27/03, 10:35 AM2