Innovation Beyond Technology User’s Manual M o d e l : I P 8 11 8 5.GHz Digital Spread Spectrum Accessory Handset FEATURING: • Handset Speakerphone • Headset Compatible (2.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
Important Safety Instructions VTech Telecommunications Canada Ltd. Customer Service: www.vtechcanada.com or 1-800-267-7377. In the US, call VTech Communications, Inc. at 1-800-595-9511. BEFORE USING YOUR IP 811, CAREFULLY PEEL OFF THE PROTECTIVE FILM COVERING THE DISPLAYS. IMPORTANT: Your IP 811 is an accessory handset for use with the IP 8100-2/81003 systems. You must have one of these base units in order to use the accessory handset.
Parts Check List 1. Handset 2. Handset Charger 3. Charger Wall Mounting Bracket 4. Belt Clip 5. User’s Manual 6. Battery Pack To purchase replacement batteries, visit us on the web at shop.vtechcanada.com or call VTech Telecommunications Canada Ltd. at 1-800-267-7377. In US, call VTech Communications, Inc. at 1-800-595-9511. NOTE: Use only VTech batteries (part number 89-1324-00-00). Handset Belt Clip Charger Wall Mounting Bracket Battery Pack Handset Charger User’s Manual 3 811.vcan.om.eng.
The Handset Layout 12 13 16 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Antenna Earpiece Volume Control CID (Scroll Down) On (Flash) Voicemail Dialing Keys (0-9, *, #) Redial (Pause) Speakerphone LCD Display Select (Menu) Phonebook (Scroll Up) Headset jack (2.5mm) Off (Clear) Intercom Mute (Delete) 4 811.vcan.om.eng.
Connecting Power to Handset Charger Because the IP 811 is an accessory handset to the IP 8100-2/8100-3 all you need to do is choose the location for your handset charger and plug in the power supply into an electrical outlet. Getting Started Setup CAUTION: Use only the VTech power supply provided with your telephone. Installation of Battery Pack 1. Remove battery compartment cover by pressing on the indentation and sliding downward. 2.
Getting Started Setup Charging of the Handset Battery The handset of your cordless telephone is powered by a rechargeable battery. It charges automatically whenever the handset is in its charger. You should charge the battery for 10-12 hours when you first receive your phone. You will know the battery needs charging when: • The low battery message is displayed: • The handset seems completely dead, the LCD is completely clear and does not activate when you press the keys. IMPORTANT: 1.
Your IP 811 is an accessory handsets for use with the IP 8100-2/8100-3 base unit. To register your IP 811 for the first time: 1. After charging the battery, the screen will display: ENTER BASE Getting Started Registration 2. Enter the 15 digit base unit ID code, located on the underside of your IP 8100-2/8100-3 base. If you make a mistake, press the DELETE key to backspace (delete characters), then enter the correct information. 3. Press SEL to complete the registration process. 4.
Handset Indicators Handset Icons Basic Operation Icon Description MUTE • Turns on when the microphone is muted. NEW • Turns on when there are new call log entries. • Turns on when the ringer is muted. • Low battery indicator and charging indicator. Handset LEDs LED SPEAKER Description • LED is on when in handsfree mode. 8 811.vcan.om.eng.
Headset Operation Headset Operation Your IP 811 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree conversations. If you choose to use the headset option, you must obtain an optional accessory headset that is compatible with the IP 811. To purchase a headset, visit us on the web at shop.vtechcanada.com or call VTech Customer Service at 1-800-267-7377. Once you have a compatible 2.5mm headset, locate the headset jack on the IP 811 handset.
Maintenance Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your base unit near a sink, bathtub or shower.
In Case Of Difficulty The Phone Doesn’t Work At All • Make sure the power cord is plugged in. • Make sure the Ethernet cable is plugged firmly into the base unit and the broadband connection. • Make sure the batteries are properly charged. If you get a LOW BATTERY message or indication, the batteries need charging. No Dial Tone • First check all the suggestions above. • Please refer to the Troubleshooting section of the Base Unit Features Manual of IP 8100-2/ 8100-3.
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions, This limited warranty extends only to th
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1- 800-595- 9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call.
FCC, ACTA, and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC, ACTA, and IC Regulations Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
Technical Specifications FREQUENCY CONTROL SIZE Crystal controlled PLL synthesizer Handset: 182mm x 55.3mm x 40mm (including antenna) Charger: 76.5mm x 79.4mm x 45.2mm TRANSMIT FREQUENCY Base: 5725 - 5850 MHz Handset: 2400 - 2483.5 MHz WEIGHT RECEIVE FREQUENCY (excluding Battery) Base: 2400 - 2483.5 MHz Handset: 5725 - 5850 MHz Charger: 225 grams CHANNELS 95 Channels Handset: 3.6V @ 600mAh NiMH Charger: 9 V DC @ 150mA NOMINAL EFFECTIVE RANGE MEMORY Maximum power allowed by FCC and IC.
Table Of Contents IMPORTANT SAFETY INSTRUCTIONS .......................................................... 1 Parts Check List ........................................................................................... 3 The Handset Layout ..................................................................................... 4 GETTING STARTED ......................................................................................... 5 Set Up ......................................................................
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www.vtechcanada.com 811.vcan.om.eng.
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., Richmond, B.C. V6X 1Z9. Copyright © 2005 for VTECH TELECOMMUNICATIONS LTD. Printed in China 91-000296-010-000 ISSUE 0 811.vcan.om.eng.
