User Guide

Configuration File Parameter Guide 97 Back to Contents
VCS754 Administrator and Provisioning Manual
Setting: network.nat.public_ip_addr
Description: Sets the public IP address.
Values: Text string (IPv4) Default: 0
Setting:
network.nat.public_sip_port
Description: Sets the public SIP port.
Values: 1–65535 Default: 5060
Setting:
network.nat.public_rtp_port_start
Description: Sets the public RTP port range start.
Values: 1–65535 Default: 18000
Setting:
network.nat.public_rtp_port_end
Description: Sets the public RTP port range end.
Values: 1–65535 Default: 19000
Setting:
network.ip.dhcp_enable
Description: Indicates whether DHCP is enabled.
Values: 0 (disabled), 1 (enabled) Default: 1
Setting:
network.ip.static_ip_addr
Description: Sets a static IP address for the network.
Values: Text string (IPv4) Default: Blank
Setting:
network.ip.subnet_mask
Description: Sets the subnet mask for the network.
Values: Text string (IPv4) Default: Blank
Setting:
network.ip.gateway_addr
Description: Sets the Gateway IP address.
Values: Text string (IPv4) Default: Blank