User Guide

Configuration File Parameter Guide 95 Back to Contents
VCS754 Administrator and Provisioning Manual
"network" Module: Network Settings
The network settings follow the format: network.[element].
General configuration file settings
Setting: network.rtp.port_start
Description: Sets the Local RTP port range start.
Values: 1–65535 Default: 18000
Setting:
network.rtp.port_end
Description: Sets the Local RTP port range end.
Values: 1–65535 Default: 19000
Setting:
network.vlan.wan.enable
Description: Enables or disables the WAN VLAN.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
network.vlan.wan.id
Description: Sets the WAN VLAN ID.
Values: 0–4095 Default: 0
Setting:
network.vlan.wan.priority
Description: Sets the WAN port priority.
Values: 0–7 Default: 0
Setting:
network.lldp_med.enable
Description: Enables or disables LLDP-MED.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
network.lldp_med.interval
Description: Sets the LLDP-MED packet interval (in seconds).
Values: 1–30 Default: 30