User Guide

Using the WebUI 63 Back to Contents
VCS754 Administrator and Provisioning Manual
Time and Date Format
Click the link for each setting to see the matching configuration file parameter in
“"time_date" Module: Time and Date Settings” on page 102. Default values and ranges are
listed there.
Network Time Settings
Time Zone and Daylight Savings Settings
Setting Description
Date Format Sets the date format.
Time Format Sets the clock to a 24-hour or 12-hour format.
Setting Description
Enable Network Time Enables or disables getting time and date information for
your phone from the Internet.
NTP Server If Enable Network Time is selected, enter the URL of your
preferred time server.
Use DHCP (Option 42) If Enable Network Time is selected, select to use DHCP to
locate the time server. Option 42 specifies the NTP server
available to the phone. When enabled, the phone obtains
the time in the following priority:
1. Option 42
2. NTP Server
3. Manual time.
Setting Description
Time Zone Select your time zone from the list.
Automatically adjust
clock for Daylight
Savings
Select to adjust the clock for daylight savings time
according to the NTP server and time zone setting. To
disable daylight savings adjustment, disable both this
setting and User-defined Daylight Savings Time.
User-defined DST Select to set your own start and end dates and offset for
Daylight Savings Time. To disable daylight savings
adjustment, disable both this setting and Automatically
adjust clock for Daylight Savings.
DST Start: Month
DST Start: Week
DST Start: Day
DST Start: Hour
If User-defined DST is enabled, set the start date and time
for daylight savings: Month, week, day, and hour.