User Guide

Configuration Using the Phone Menus 22 Back to Contents
VCS754 Administrator and Provisioning Manual
To set the VLAN ID for the VCS754:
1. From the Network setting menu, press
 or  to highlight VLAN ID, and then
press SELECT.
2. On the VLAN ID menu, press
 or  to enable or disable the WAN VLan.
3. Press
 and enter the WAN port number. Use the dial pad and the soft key
to enter characters. The valid range is 0 to 4095.
4. Press
 and then press  or  to enable or disable the PC port VLan.
5. Press
 and enter the PC port number. Use the dial pad and the soft key to
enter characters. The valid range is 0 to 4095.
6. Press .
To set other settings (DNS and NTP):
1. From the Network setting menu, press
 or  to highlight Others, and then press
SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error message
appears briefly before returning you to the Network setting menu.
2. Enter the IP address for the primary DNS server. Use the dial pad and the soft
key to enter characters. Press
 or  to advance to the next character.
3. Press
 and enter the IP address for the secondary DNS server. The VCS754 uses
this server if the primary server does not respond.
4. Press
 and enter the IP address for the NTP server. If the VCS754 does not use an
NTP server, you must manually enter the time and date settings.
5. Press .
Using the Line menu
Use the Line menu to configure line-specific settings for the phone.
Backspc
Backspc
Save
Add dot
Save