User`s manual

13

You can page the wireless microphone units to help you relocate them.
Press in idle mode.
Press or to select , and then press .
All registered wireless microphone units that are outside charging cradles and
within range will beep for 60 seconds.
To stop the paging beep, press on the wireless microphone unit or place it
back to the base unit charging cradles.

When the telephone is ringing, you can temporarily silence the ringer of the base unit
without disconnecting the call. The next call rings normally at the preset volume.
To silence the ringer:
Press on the base unit and  displays.

If your telephone system supports 3-party call conferencing, you can set up a
conference call.
1. Press .
2. When you hear a dial tone, dial the first phone number.
3. When the first call is answered, press to put the first call on hold.
4. When you hear a dial tone, dial the second phone number.
5. When the second call is answered, press . Your conference call starts.
This conference call descriptions may vary depending on your local public network or
your private telephone system. Please contact your local operator or phone installer.
1.
2.
3.
4.
1.