Operating instructions

26
Handset and Base Operation
INTERCOM
INTERCOM
From Base to ALL Handsets:
• To page all Handset from the
Base press the INTERCOM
key. This will cause all Handsets
linked with this Base to ring.
• Each Handset will display
GLOBAL CALL FROM BASE.
• Any Handset can then answer
the PAGE, and enter INTERCOM
mode with the Base by pressing
the INTERCOM key.
• To end an intercom call, press
OFF on the Handset or
INTERCOM on the Base.
From Base to a particular Handset :
• Press the Base INTERCOM key, then press the number of the Handset
you want to call (e.g. INTERCOM 2).
• Handset 2 can then answer the intercom call by pressing INTERCOM key.
• To end an intercom call press OFF on the Handset or INTERCOM on the
base.
From Handset to Base :
• Press the INTERCOM key followed by 0.
• The Base will ring once and then automatically enter INTERCOM mode.
• To end an intercom call press OFF on the Handset or INTERCOM on
the Base.
From Handset to Handset :
• Press the INTERCOM key
followed by the number of the
other Handset you wish to call
(e.g. INTERCOM 3).
• Handset 3 can then answer the
intercom call by pressing the
INTERCOM key.
• To end the intercom call press
OFF on either Handset.
From Handset to Base/Handsets:
• Press the INTERCOM key followed by . The initiating Handset will display
PERFORMING GLOBAL PAGE. All registered Handsets and the Base will
ring.
*
Advanced Operations
• If only one handset registered, the handset LCD will display ‘Feature
Not Available’ when Intercom key is pressed.