Operating instructions

Handset and Base Operation

Mute Function

During an active call pressing either the MUTE soft key on the Handset or the

MUTE key on the Base ( when in speakerphone mode ), will disable the

microphone. Press MUTE key again to return to normal 2-way conversation.

Hold Function

During an active call using the Handset, press the HOLD soft key to

place your call on hold. Press ON (or SPEAKER) to return to the two-

way conversation.

Flash Function

VOLUME

MUTE

FLASH

You can use your v 2651 with services such as Call Waiting. Simply press the

ON key on the Handset to flash the line. Using the Base Speakerphone, press

the FLASH key.

Volume Control

From the Handset:

During an active call, press the VOL soft key, then use the and soft keys to

adjust the earpiece (or Handset Speaker) volume.

Notice the change in the display graph as you adjust the volume. An increase

in volume will be represented by an increase in shaded area on the graph. A

decrease in volume will result in a reduction of the shaded area.

Advanced Operations

Hold down the REDIAL key for more than 2 seconds to erase the contents

in redial memory. This is to prevent the accidental dialing of the number

stored in redial memory. You will hear a confirmation tone.

Press OK to confirm your setting.

From the Base:

During an active call, press the

VOLUME keys to adjust the

speakerphone volume. You will hear

a special tone when you reach the

highest or lowest setting.