Instruction manual

CONNECTING TO A TV

NOTE: Before you connect the V.Smile Baby™ Infant Development

System to a TV, check to make sure that the unit is working. Once

you have turned the unit ON, the power indicator light should glow.

If the ON/OFF Button does not glow, check to see that the adaptor

is connected correctly or that the batteries are installed correctly. If

the batteries are not installed correctly, the V.Smile Baby™ Infant

Development System will not function and damage to the unit

could result. Make sure that your TV and the unit are turned OFF

before you begin making connections.

Connect the V.Smile Baby™ Infant Development System to your TV or

monitor by plugging the colored cables on the unit into the matching color

video and audio input jacks on your TV set.

For TVs with stereo audio inputs:

- Connect the yellow plug on the

V.Smile Baby™ cable

to the yellow video input terminal on your TV.

- Connect the white plug on the

V.Smile Baby™ cable

to the white audio input terminal on your TV.

For TVs with a mono audio inputs:

- Connect the yellow plug on the

V.Smile Baby™ cable

to the yellow video input terminal on your TV.

- Connect the white plug on the

V.Smile Baby™ cable

to the white audio input terminal on your TV.

CONNECTING TO A VCR

If there is no video IN and audio IN terminal on your TV set, you can connect

V.Smile Baby™ to a VCR.

- Connect the yellow plug on the

V.Smile Baby™ cable

to the yellow video input terminal on your VCR.

- Connect the white plug on the

V.Smile Baby™ cable

to the white audio input terminal on your VCR.

INTRODUCTION