Instruction manual

7
For TVs with stereo audio inputs:
-
Connect the yellow plug on the V.Baby
TM
cable to the yellow
video input terminal on your TV.
- Connect the white plug on the V.Baby
TM
cable to the white
audio input terminal on your TV.
For TVs with mono audio inputs:
-
Connect the yellow plug on the V.Baby
TM
cable to the yellow
video input terminal on your TV.
-
Connect the white plug on the V.Baby
TM
cable to the white
audio input terminal on your TV.
CONNECTING TO A VCR
If there is no video IN and audio IN terminal on your TV set, you can connect
V.Baby
TM
through a VCR.
- Connect the yellow plug on the
V.Baby
TM
cable to the yellow
video input terminal on your VCR.
- Connect the white plug on the V.Baby
TM
cable to the white
audio input terminal on your VCR.
TO BEGIN PLAY
• Make sure the unit is turned OFF.
• Insert a Baby Smartridge™ into the Smartridge™ slot on the front of the console.
The Smartridge™ should lock into place. Please use care when removing the
Smartridge™ from the slot.
•
Turn on the TV.
• Set your TV input mode to accept input from the port to which
V.Baby™ is
connected. In many cases this will involve setting the TV to ‘video’ mode; however,
since all TVs vary, please refer to your TV or VCR manual for further details.
•
Turn the V. Baby™ Infant Development System on by pressing the ON
button.
• T
urn the V.Baby™ activity panel on by sliding the TV PLAY/OFF/PLAY ALONE
Switch.
TO BEGIN PLAY