User`s manual

Multiple handset use
24
Push-to-talk (PTT)
3. Release PUSH TO TALK after speaking. Both devices beep once again and
the screens show Press and hold [PTT] to talk. Then you can
press and hold PUSH TO TALK to continue speaking or the destination
device can respond (see Answer a PTT call on page 26).
4. To end the PTT call, press OFF/CANCEL or place the handset in the
charger. The handset shows Push to talk Ended for a few seconds.
Using the telephone base:
1. When the telephone base is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset, press PTT. Then use the dialing keys
to enter the destination handset number.
The telephone base shows Connecting to HANDSET X... (HANDSET
represents the handset name, X represents the destination handset number)
for a few seconds. When the connection is made, both the telephone base
and destination handset display Press and hold [PTT] to talk.
2. Press and hold PTT. A chirp indicates your microphone is on. SpeakSpeak
towards the telephone base. Your voice is broadcast to the destination
handset. While you are speaking, the telephone base shows PTT To
handset: X.
3. Release PTT after speaking. Both devices beep once again and the screens
show Press and hold [PTT] to talk. Then you can press and hold PTT to
continue speaking or the destination device can respond (see Answer a
PTT call on page 26).
4. To end the PTT call, press CANCEL. The telephone base shows Push to
talk Ended for a few seconds.
•
•