User`s manual

Multiple handset use
21
Intercom
Using the telephone base:
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT.
If you have one handset, the telephone base shows Calling HANDSET X.
If you have more than one handset, the telephone base shows
INTERCOM TO: Press qCID or pDIR to scroll to the desired handset and
press MENU/SELECT. The telephone base shows Calling HANDSET X or
Calling all handsets.
The destination handset(s) rings and shows Base is calling, BASE 0 is
calling or BASE 0 is calling all.
2. To answer the intercom call, press PHONE/FLASH, /SPEAKERSPEAKER or any
dialing key (0-9, TONE , or
#
) on the destination handset. Both the base
and the handset now show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL or places the
cordless handset back in the charger, presses CANCEL on the telephone
base, or hangs up the corded handset. The other party hears four beeps.. The other party hears four beeps. The other party hears four beeps.
Both devices display Intercom ended.
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is a two-beep call
waiting tone.
To answer the call, press PHONE/FLASH on the cordless handset. Or on
the telephone base, lift the corded handset or press /SPEAKER. The
intercom call ends automatically. The party on the intercom call hears four
beeps. Other system devices can also answer the incoming call by pressing
PHONE/FLASH or /SPEAKER on the handset, or pressing /SPEAKER
or lifting the corded handset on the telephone base.
To end the intercom call without answering the incoming call, press
OFF/CANCEL on the handset or CANCEL on the telephone base; or
return the corded handset back to the telephone base.
•
•
•
•