User`s manual

Multiple handset use
20
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base. You can buy additional expansion handsets
(model AT&T CL80111) for this telephone base to expand your telephone
system (up to 12 handsets).
Using a cordless handset:
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT.
If you have one handset, the handset shows Calling base.
If you have more than one handset, the handset shows INTERCOM TO:
Press qCID or pDIR to scroll to the desired device and press
MENU/SELECT. Your handset screen shows Calling HANDSET X, Calling
BASE 0 or Calling all devices.
The destination device(s) rings and shows HANDSET is calling, HANDSET
X is calling or HANDSET X is calling all (HANDSET represents the handset
name, X represents the handset number).
2. To answer the intercom call, press PHONE/FLASH, /SPEAKERSPEAKER or any
dialing key (0-9, TONE , or
#
) on the called cordless handset. Or on the
called telephone base, press /SPEAKERSPEAKER or any dialing key (0-9, TONE ,
or
#
), or lift the corded handset. Both devices now show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL or places the
cordless handset back in the charger, presses CANCEL on the telephone
base, or hangs up the corded handset. The other party hears four beeps.. The other party hears four beeps. The other party hears four beeps.
Both devices display Intercom ended.
•
•