User`s manual

19
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any handsets.
To start the paging tone:
Press /HANDSET LOCATOR on the telephone base to start the paging
tone on all handsets for 60 seconds.
NOTE: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that
handset stops, but the paging to the rest of the handsets continues.
To stop the paging tone:
Press PHONE/FLASH, /SPEAKERSPEAKER, or any dialing key (0-9, TONE or #)
on the handset(s).
-OR-
Press /HANDSET LOCATOR, MUTE or CANCEL on the telephone base.
Join a call in progress
When a handset or the telephone base is already on a call and you would
like to join the call, press PHONE/FLASH or /SPEAKERSPEAKER on your handset or
/SPEAKERSPEAKER on your telephone base.
To end the call using a handset, press OFF/CANCEL or place the handset in
the charger. To end the call using the telephone base, press /SPEAKERSPEAKER.
The call does not end until all handsets and the telephone base hang up.
NOTE: You can use up to four system handsets and the telephone base at the same time
on an outside call.
•
•
•
Multiple handset use