User`s manual

Multiple handset use

Push-to-talk (PTT)

Make an outgoing call during PTT call

Using a cordless handset or the telephone base:

During a one-to-one PTT call, press LINE 1/FLASH or LINE 2/FLASH on your

handset or 1 LINE or 2 LINE on the telephone base to get a dial tone. The

PTT call ends automatically.

During a one-to-group PTT call, press LINE 1/FLASH or LINE 2/FLASH on the

initiating handset or 1 LINE or 2 LINE on the telephone base. The PTT call

ends automatically and you get a dial tone.

During a one-to-group PTT call, press LINE 1/FLASH or LINE 2/FLASH on any

one of the destination handsets or 1 LINE or 2 LINE on the telephone base.

That device gets a dial tone. The PTT call continues for the rest of the PTT

participants.

End or leave a PTT call

Using a cordless handset or the telephone base:

For one-to-one PTT calls, both initiating and destination devices can end the

PTT call. For PTT calls to multiple devices, the initiating device can end the PTT

call. If any one of the destination devices leaves the PTT call, the call continues

until all participants or the initiator hangs up.

Press OFF/CANCEL or END on the handset, or press CANCEL or END on the

telephone base. The screens show Push to talk Ended.

-OR-

Place the cordless handset in the charger. The handset returns to idle mode.

The telephone base screen shows Push to talk Ended.

NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the PTT

call remains open for a short time. If no one presses PUSH TO TALK on the handset or PTT on

the telephone base within ten seconds, the PTT call ends automatically.

•