User`s manual

Multiple handset use

Push-to-talk (PTT)

PTT call to a single device

Using a cordless handset:

1. There are a few ways to begin a PTT call to a single device. When the

handset is not in use:

If you have one handset, press and hold PUSH TO TALK.

If you have more than one handset:

w Press PUSH TO TALK on the handset, and then use the dialing keys to

enter the destination device number.

-OR-

w Press PUSH TO TALK on the handset. Press CID or DIR to highlight

the destination device number, and then press SELECT or PUSH TO

TALK.

The handset shows Connecting to HANDSET X...

(HANDSET represents the

handset name, X represents the destination handset number) or Connecting

to BASE 0... (BASE represents the base name)

for a few seconds. When the

connection is made, both your and the destination device screens display

Press and hold [PTT] to talk.

2. Press and hold PUSH TO TALK. A chirp indicates your microphone is on.

Speak towards the device. Your voice is broadcast to the destination device.

While you are speaking, your handset shows PTT To HANDSET X or

PTT To BASE 0.

3. Release PUSH TO TALK after speaking. Both devices beep once again and

the screens show Press and hold [PTT] to talk, and then you can

press and hold PUSH TO TALK to continue speaking or the destination

device can respond (see Answer a PTT call on page 83).

4. To end the PTT call, press OFF/CANCEL or END, or place the handset in the

charger. The handset shows Push to talk ended.

NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one

presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.

•