User`s manual

Multiple handset use

Call transfer using intercom

Using the telephone base:

When on an outside call, press OPTION.

Press SELECT to choose Intercom. The call is automatically put on hold.

If you have one handset, the outside call is put

on hold and your telephone base displays Calling HANDSET. The

handset and displays BASE is calling.

If you have more than one handset, your base displays INTERCOM

TO: Use the dialing keys to enter a specific handset number (1-9 for

handsets 1-9, TONE followed by 0-2 for handsets 10-12,

# for a single cordless headset, and # followed by 1 or 2 for

cordless headset 1 or cordless headset 2 respectively), or Press

CID, DIR, /RECORD, or /DELETE to select a destination handset,

and then press SELECT.

The call is automatically put on hold. Your telephone base screen displays

Calling HANDSET X. The destination device rings and displays BASE is calling.

3. To answer the intercom call on any destination handset, press

ANSWER,

LINE 1/FLASH, LINE 2/FLASH, /SPEAKER, A CELL, B CELL or any

dialing key (0-9 or TONE ) on the destination handset. Both handsets and

the telephone base show Intercom and the outside call is still on hold.

4. From this intercom call, you have the following options:

You can transfer the call. Press OPTION , and then press SELECT to select

Transfer on the telephone base. Your screen shows

Call transferred. The other handset automatically

connects to the outside call.

You can let the other device join you on the outside

call in a 3-way conversation. Press OPTION , and

then CID, DIR, /RECORD, or

/DELETE to highlight Share call, and press SELECT.

You can end the intercom call and continue the outside call with your

telephone base. Press CANCEL, END, 1 LINE, 2 LINE, SPEAKER ,

CELL A , or CELL B on the telephone base. The destination device screen

shows Intercom ended.

NOTES:

If you want to cancel an intercom call and reconnect to the outside call before the destination

handset answers, press CANCEL or END on the telephone base.

If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on

a call, or is out of range, the initiating device shows No answer. Try again. and returns to the outside call.

•

Transfer

Share call

SELECT

BACK