User`s manual

Multiple handset use

Intercom

Using the telephone base:

Press MENU in idle mode to enter the main menu.

Press CID, DIR, /RECORD, or /DELETE to

highlight Intercom, and then press SELECT.

If you have one handset, the telephone base shows

Calling HANDSET X.

If you have more than one handset, the

telephone base shows INTERCOM TO: Use the

dialing keys to enter a specific handset number

(1-9 for handsets 1-9, TONE followed by 0-2 for

handsets 10-12, # for a single cordless headset,

# followed by 1 or 2 for cordless headset 1 or cordless headset 2

respectively, or press CID, DIR, /RECORD, or /DELETE to

highlight the desired handset and press SELECT. The telephone base

shows Calling HANDSET X.

The destination device(s) rings and shows BASE is calling.

2. To answer the intercom call, press

1 LINE, 2 LINE, SPEAKER ,

CELL A , CELL B , any dialing key (0-9, TONE ), ANSWER, or lift the

corded handset. Both devices now show Intercom.

3. To end the intercom call, press

END, OFF/CANCEL, or place the cordless

handset into the charger; or press END on the telephone base. The other

party hear four beeps. Both devices display Intercom ended.

NOTES:

Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the cordless

handset or END on the telephone base.

If the called device is not answered within 100 seconds, or accessing the directory or caller ID

log, or is on a call, or is out of range, the initiating device shows No answer. Try again.

To temporarily silence the intercom ringer, press SILENCE , OFF/CANCEL, or MUTE/DELETE on the

cordless handset, or press SILENCE or CANCEL on the telephone base.

You can only use one pair of devices at a time to make intercom calls.

•

Answering sys