User`s manual

Multiple handset use

Intercom

Use the intercom feature for conversations between a cordless handset and the

telephone base, or two cordless handsets. You can buy additional expansion

handsets (AT&T model TL86003) for this telephone base to expand your

telephone system (up to 12 handsets).

To initiate, answer, and end an intercom call:

Using a cordless handset:

Press MENU in idle mode to enter the main menu.

Press CID or DIR to highlight Intercom, and then

press SELECT.

If you have one handset, the handset shows

Calling base.

If you have more than one handset, the handset

shows INTERCOM TO: Use the dialing keys to

enter a specific device number (0 for the

telephone base, 1-9 for handsets 1-9, TONE

followed by 0-2 for handsets 10-12, # for a

single cordless headset, # followed by 1 or 2 for

cordless headset 1 or cordless headset 2 respectively, or

press qCID or pDIR to highlight the desired device and press SELECT.

Your handset screen shows Calling HANDSET X or Calling Base.

The destination device(s) rings and shows HANDSET X is calling (HANDSET

represents the handset name, X represents the handset number).

2. To answer the intercom call, press LINE 1/FLASH, LINE 2/FLASH,

/SPEAKER, A CELL, B CELL, any dialing key (0-9, TONE ), or press

ANSWER on the destination handset. Both devices now show Intercom.

3. To end the intercom call, press

END, OFF/CANCEL, or place the cordless

handset into the charger; or press END on the telephone base. The other

party hear four beeps. Both devices display Intercom ended.

•

Play messages