User`s manual

Telephone operation

Options while on calls

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone

dialing temporarily during a call. This is useful if you need to send touch-tone

signals to access your telephone banking or long distance services.

During a call:

Press TONE on the cordless handset or telephone base.

Use the dialing keys to enter the desired number. The telephone sends

touch-tone signals.

The telephone automatically returns to pulse dialing after you end the call.

Hold

You can place a call on hold. You hear an alert tone at the telephone base if

you have not taken the call off of hold after 14 minutes. You hear another alert

tone at the telephone base 30 seconds later. At 15 minutes on hold, the call on

hold automatically disconnects.

To place a call on line 1 or line 2 on hold:

Press HOLD on a cordless handset or the telephone base.

L1) On hold and/or L2) On hold appears on the cordless handset and

telephone base. ,

or flashes on the screens of the handset

and the telephone base.

To resume a call on line 1 or line 2 on hold:

Press LINE 1/FLASH or LINE 2/FLASH on a cordless handset, or press 1 LINE

or 2 LINE on the telephone base.

To place a cell call on hold:

Press HOLD on cordless handset or the telephone base. CL) A On hold,

CL) B On hold, or CL) A&B On hold appears on the handset and telephone

base. A , B, or A B flashes on the screens of the cordless handset and

telephone base.

To resume a cell call on hold:

Press A CELL or B CELL on the cordless handset, or press CELL A or

CELL B on the telephone base.

•