User`s manual

48
Telephone settings
Cordless handset and telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
Using the telephone base:
Press MENU in idle mode to enter the main menu.
Press CID, DIR, /RECORD, or /DELETE to
highlight Settings, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
highlight Dial mode, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
choose Touch-tone or Pulse, and then press SELECT.
The screen displays Dial mode is touch-tone or
Dial mode is pulse. You hear a confirmation tone and
the screen returns to the previous menu.
Line preference
The line preference setting determines the default line for the corded handset,
and the speakerphones on a cordless handset or the telephone base, for
outgoing calls. You can select Auto, Line 1, or Line 2 for your call.
Using the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Settings, and then press SELECT .
3. Press
CID, DIR, /RECORD, or /DELETE to
highlight Line preference, and then press SELECT .
4. Press
CID, DIR, /RECORD, or /DELETE to
highlight Auto, Line 1, or Line 2, and then press SELECT
to save. You hear a confirmation tone and the screen
returns to the previous menu.
NOTE: If both line 1 and line 2 are in use or on hold, the telephone system will take line 1
automatically when you use the corded handset, or the speakerphone on a cordless handset
or the telephone base.
1.
2.
3.
4.
p
q
SELECT
BACK
SETTINGS
LCD language
Line preference
Voicemail #
p
q
SELECT
BACK
LINE PREFERENCE
Auto
Line 12
Line 2
p
q
SELECT
BACK
SETTINGS
Key tone
CID time sync
Dial mode
DIAL MODE
Touch-tone
Pulse2
p
q
SELECT
BACK