User`s manual

46
Telephone settings
Cordless handset and telephone base settings
Cell area code
Most cell phone entries are stored in a 10-digit format. If all of your cell phone
entries are stored this way, you do not need to program your cell area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly.
To set the cell area code:
Using a cordless handset:
Press MENU in idle mode to enter the main menu.
Press CID or DIR to highlight Directory, and then
press SELECT .
Press CID or DIR to highlight a desired downloaded
directory, and then press OPTION .
Press CID or DIR to highlight Cell area code, and then
press SELECT . The screen briefly shows Only for 7 digits dialing from
Caller ID log.
Use the dialing keys to enter a three-digit home area code.
Press MUTE/DELETE or BACKSP to erase a digit.
Press and hold MUTE MUTE/DELETE to erase all digits.
Press CID or DIR to move the cursor to the left or right.
Press SAVE to confirm. You hear a confirmation tone and the screen shows
Area code will not be shown in Caller ID log briefly before returning to
the previous menu.
1.
2.
3.
4.
5.
•
•
•
6.
CELL AREA CODE
- - -
BACKSP
SAVE