User`s manual

45
Telephone settings
HOME AREA CODE
- - -
SAVE
BACKSP
Cordless handset and telephone base settings
Using the telephone base:
Press MENU in idle mode to enter the main menu.
Press CID, DIR, /RECORD, or /DELETE to
highlight Directory, and then press SELECT .
Press OPTION to choose Home.
Press CID, DIR, /RECORD, or /DELETE to
highlight Home area code, and then press SELECT .
The screen briefly shows Only for 7 digits dialing from Caller ID log.
Use the dialing keys to enter a three-digit home area code.
Press /DELETE or BACKSP to erase a digit.
Press and hold /DELETE to erase all digits.
Press CID or /REPEAT to move the cursor to the left. Press DIR
or /SKIP to move the cursor to the right.
Press SAVE to confirm. You hear a confirmation tone and the screen shows
Area code will not be shown in Caller ID log briefly before returning to
the previous menu.
NOTE:
If in the future, your telephone service provider requires you to dial ten digits to make a local
call (area code plus telephone number), you need to delete your home area code. With the
home area code displayed, press and hold MUTE/DELETE on the handset or press and hold
/DELETE on the telephone base until the digits are deleted, and then press
SAVE
. The home
area code is now restored to its default setting of _ _ _ (empty).
1.
2.
3.
4.
5.
•
•
•
6.
•