User`s manual

37
Telephone settings
Cordless handset and telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be correct so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of a caller ID service and set the date and
time manually (see Use caller ID to automatically set date and time on
page 43).
After power failure or handset registration, the system prompts you to set the
date and time. Follow the steps below to set the month, day, year and time.
Using a cordless handset:
To set the date and time manually:
Press MENU in idle mode to enter the main menu.
Press CID or DIR to highlight Set date/time, and then
press SELECT .
Press CID or DIR to choose the month, and then press
NEXT , or enter the 2-digit number using the dialing keys.
Press CID or DIR to choose the day, and then
press NEXT, or enter the 2-digit number using the
dialing keys.
Press CID or DIR to choose the year, or enter the
2-digit number using the dialing keys, and then
press NEXT to move on to set the time.
Press CID or DIR to choose the hour, and then press SAVE , or enter the
2-digit number using the dialing keys.
Press CID or DIR to choose the minute, and then press SAVE , or enter
the 2-digit number using the dialing keys.
Press CID or DIR to highlight AM or PM, or press 2 for AM or 7 for PM,
and then press SAVE to confirm. You hear a confirmation tone and the
screen returns to the previous menu.
1.
2.
3.
4.
5.
6.
7.
8.
SET DATE
07/29/13
MM/DD/YY
K
S
BACK
NEXT
SET TIME
05:41 PM
K
S
BACK
SAVE