User`s manual

32
Bluetooth
Bluetooth setup
Change PIN
You may be required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press
MENU on the telephone base in idle mode to
enter the main menu.
2. Press
CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press SELECT .
3. Press
CID, DIR, /RECORD, or /DELETE to
highlight Change PIN, and then press SELECT .
The telephone base displays ENTER NEW PIN and
the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
Press /DELETE to erase a digit.
Press and hold /DELETE to erase all digits.
Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right.
5. Press
SET to save.
Cell ringer
If this feature is on and you have connected an iPhone (iOS 4.1 or later) to your
telephone system, the telephone plays your iPhone ringtone when there is an
incoming call.
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press
CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press SELECT .
3.
Press CID, DIR, /RECORD, or /DELETE to
highlight Cell ringer, and then press SELECT .
If there is more than one paired device on the
device list, press CID, DIR, /RECORD or
/DELETE to highlight the desired device, and
then press SELECT .
4. Press
CID, DIR, /RECORD, or /DELETE to choose On or Off, and then
press SET .
NOTE: The quality of ringtone played on your telephone is subject to individual
ringtone characteristics.
•
•
•
•
BLUETOOTH
Device list
Download dir
Chan
g
e PIN
BACK SELECT
ENTER NEW PIN
0000
BACK SET
BLUETOOTH
Download dir
Change PIN
Cell ringer
BACK SELECT
CELL RINGER
On
Offf
BACK SET