User`s manual

28
Bluetooth
Bluetooth setup
Replace an active device
If you already have 2 active devices and you want to activate a different device,
you must deactivate one of the 2 active devices.
To replace an active device:
Press MENU on the telephone base in idle mode.
Press CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
highlight Device list, and then press SELECT .
Press CID, DIR, /RECORD, or /DELETE to
highlight the device you want to activate without
a prefix A: or B:, and then press OPTION .
Press CID, DIR, /RECORD, or /DELETE to
highlight Connect, and then press SELECT . The
handset displays Only 2 devices can be ready for
connection, and then a list of devices
for deactivation.
Press CID, DIR, /RECORD, or /DELETE to
highlight the device to be deactivated, and then
press NEXT . The screen displays Cell Phone X is
deactivated or Headset X is deactivated (X represents
the slot of the deactivated device) and you hear a
confirmation tone. The screen then displays Connecting
Cell Phone X to the base... or Connecting Headset X
to the base... (X represents the slot of the replacement
device)
Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm
the connection. When the new device is successfully
activated and connected, the handset displays
Device connected. You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
7.
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
DEVICE LIST
A:Cell Phone A
B:Headset A
Cell Phone B
BACK OPTION
DEACTIVATE
A:Cell Phone A
B:Headset A
BACK NEXT
Connecting
Cell Phone B
to the base...
DEVICE LIST
A:Cell Phone B
B:Headset A
Cell Phone A
BACK OPTION
Only 2 devices
can be ready
for connection
NOTE: When adding removing, or replacing a Bluetooth device on the active devices list, all
connected devices are temporarily disconnected until the procedure is complete. It may take
up to 2 minutes to reconnect.