User`s manual

21
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become familiar
with using your Bluetooth devices and your new AT&T telephone system.
Active devices - the Device list has two active slots for two cell phones, or
one cell phone and one headset. When a device in the list is active it will have
a A: or B: in front of the device name. In order to use a Bluetooth device on a
call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service. On your
TL86103, press A CELL or B CELL on a handset, or Cell A or CELL B
on the telephone base to use the cell line.
Connected - when you pair a Bluetooth device to the TL86103, it is placed in
an active slot and automatically connected. When a device is connected,
a A and/or B will display on screens of the handset and the telephone
base. CELL A and/or CELL B/HEADSET light on the telephone base will
be on. If a device loses its connection to the telephone base, it must be
reconnected before you can use the device with the telephone system.
Device list - The list of devices connected to the telephone.
Disconnected - when a device is disconnected, A and/or B displays on the
screens of cordless handsets and the telephone base. CELL A and/or
CELL B/HEADSET light on the telephone base is off.
Discoverable mode - before a Bluetooth enabled device can be paired, it must
be set to this mode. When pairing your cell phone, the telephone base is set to
this mode. Depending on the cell phone manufacturer, this mode is sometimes
referred to as Find Me or Visibility.
LINE 1 and LINE 2 - your conventional telephone landlines. Press LINE 1/FLASH
or LINE 2/FLASH on a handset, or press 1 LINE or 2 LINE on the telephone
base to use the corresponding line.
Paired devices - The Bluetooth enabled devices (cell phones or headsets) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired to the telephone base. However, only
two paired devices can communicate with the base at a time.
Pairing - sometimes referred to as bonding. The process of sharing registration
information between two Bluetooth enabled devices. Your Bluetooth enabled
cell phone or headset must first be paired to the telephone base in order to
use it with this telephone system.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information may be exchanged between Bluetooth
devices before they can be used. This is also known as a Passkey or Passcode.
/ /