User`s manual

134
Appendix
Display screen messages
Screen messages
No AC power.
System can only
access Line 1.
The base’s corded handset is lifted during an AC power failure.
If there is an AC power failure, it is still possible to dial out and
receive incoming calls on line 1 using the corded handset.
No answer.
Try again
The device(s) you are trying to transfer a call to is out of range,
off hook, or has no power.
No battery
The handset in the charger has no battery installed.
No Bluetooth
device is ready
for connection.
There is no Bluetooth device paired to the telephone system
when you press CELL A or CELL B/HEADSET on the
telephone
base or handset.
No caller info
The caller information is unavailable.
No entries
found.
Download from
SIM only ?
There are no entries found when you download a cell phone
directory from the cell memory.
No entries
found.
Download from
Phone only ?
There are no entries found when you download a cell phone
directory from your SIM card.
There are no entries found in either the cell or SIM card when
you download a cell phone directory from both memories.
No messages
There are no messages in the answering system.
No signal.
Call ended.
The phone lost connection with the telephone base or did not
have a strong enough signal and the phone call ended.
Not available
at this time
Someone else is already using the directory or caller ID log.
When a handset tries to access the answering system or
Bluetooth menu during battery backup mode.
Number
already saved
The telephone number you have entered is already in the
directory.
Out of range
OR
no power at
base
The telephone base has lost power, or the handset is out
of range.
** Paging **
The cordless handset is paged by the telephone base.
Paging all devices
The telephone base is paging all devices.
PC CALL
PC line is on a call.
PC CALL On hold
A call on PC line has been put on hold.
Place in charger
The battery is very low. The handset should be charged.