User`s manual

www.vtechphones.com
8
GETTING STARTED
Installation
• The day is flashing. Press or until the screen displays the correct day. Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour. Press SELECT.
• The minute is flashing. Pres
s or until the screen displays the correct minute. Press SELECT.
• AM or PM
is flashing. Press or to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
• With the handset in idle (off) mode, press PROG.
• Press or until the screen displays RINGER: and the current setting.
• Press SELECT
. The current setting blinks, and you will hear a sample of the ring.
• Press
or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
• Press SELECT.
• In the event of a
power outage, or if
your phone’s power
cord is unplugged,
the time setting will
be lost.
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren’t functioning properly, install
a noise filter to the telephone line between the base
unit and the telephone line jack. Contact your DSL
provider to obtain a noise filter.
To single telephone
jack (RJ11C)
Telephone line cord
Noise filter
(For xDSL users)