Specifications

www.vtechphones.com
27
Additional Information
ADDITIONAL INFO
Problem Suggestion
Can’t Connect displays
on my handset.
• Move the handset closer to the base. You might have moved out of range.
• Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up
to one minute for the handset and base to reset.
• Other electronic products can cause interference with your cordless phone. Try installing your phone
as far away from these types of electronic devices as possible: wireless routers, radios, radio towers,
pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances
and other cordless phones.
• You are trying to use both system handsets at the same time. Be sure to only use one system
handset at a time.
The batteries will not hold
a charge.
• Make sure the battery is plugged into the handset.
• Be sure to use the AC power adaptor provided with your phone.
• Charge the battery in the handset at least 16 hours. For optimum daily performance, return the handset
to its base when not in use.
• You may need to purchase a new battery, please refer to the Batteries section of this user’s manual.
• Your phone might be malfunctioning. Please refer to the Warranty section of this user’s manual for
further instruction.
Troubleshooting