Quick Start Guide

8. Additional devices
87
Add and register a new device
1
When the telephone is
not in use, press and hold
PAGE on the telephone
base for about five
seconds until the visual
ringer indicator light turns
on. Release PAGE.
2
• You need to register your newly purchased devices to the telephone base before use.
• Make sure the new devices are powered on with batteries or with AC power before
registering them to the telephone base.
Press and hold the pair button on the
right side of the extension ringer until the
green LED light on the front flashes, then
release the button. When registration is
successful, the green LED light becomes
steady on, and then the base beeps once.
Extension ringer
Press and hold CANCEL on the back
of the SOS pendant until the LED light
on the front flashes, then release the
button. When registration is successful,
the LED light turns off, and then the
base beeps once.
SOS pendant
Press and hold the pair button on the back
of the audio doorbell until the chime button
LED light flashes, then release the pair
button. When registration is successful, the
chime button LED light becomes steady on,
and then the base beeps once.
Audio doorbell