Quick Start Guide

5
1. Connect and install
Battery backup mode
When there is a power failure, the handset displays Put HS
on base to power base and Out of range OR No pwr at base
alternately. Put the charged handset in the telephone base
to back up the telephone base power for some basic phone
operations for a short period of time. During this period, you
cannot use the answering system.
When the handset is put in the telephone base, it displays
Powering base... Don’t pick up.
You may use the handset for making or answering calls via the
handset speakerphone, but do not pick up the handset while
using it.
If you have more than one handset, all handsets display Pwr outage mode after
entering the battery backup mode. At this time, use other handsets for some basic
phone operations.
Put HS on base
to power base
Powering base...
Don’t pick up