User manual

Manual Ver1.0
- 7 -
connect the other end to your PCs network adaptor (NIC). If you are connecting a LAN to the
Master series, attach one end of the Ethernet cable to a regular hub port and the other end to the
LAN port on the M505N.
Step 3. Attach the power connector
Connect the AC power adapter to the power connector on the M505N and plug in the adapter to a
wall outlet or power extension.
Step 4. Turn on the M505N and power up your systems
Press the Power switch on the back panel of the M505N to the ON position.
Boot up your computer(s) and any LAN devices such as hubs or switches.
Step 5. Configure the M505N through the WEB interface
Please refer to Chapter 3.
Step 6. Save the configurations and Reboot
Save the changes you made on the M505N and it will automatically reboot to make the settings
permanent.