User manual

Manual Ver1.0
- 6 -
Flashing Green – Attempting WPS association
DLNA Green
Green – USB storage connected
Off - No device detected
Rear Panel
The connectors located at the rear panel have the following functions.
M505N
Interface Function
Switch(Push Button) Power switch on/off
Power Connects to the power adapter cable
Reset Button Resets unit’s configuration to factory default
DLNA USB 2.0/1.1 connection: Connects external storage
device to gateway
Ethernet 1-4 RJ-45 connector: Connects to your PC’s Ethernet port,
or to the uplink port on your LAN’s hub/switch
ADSL RJ-11 connector: Connects to your ADSL line
WPS Activate the WPS security function
Wireless Enable/Disable Wireless functionality
Connecting the Hardware
Connect the M505N to the phone jack, the power outlet, and your computer or network.
WARNING
Before you begin, turn the power off for all devices. These include your
computer(s), your LAN hub/switch (if applicable), and the M505N.
Step 1. Connect the ADSL cable and optional telephone
Connect one end of the phone cable to the RJ-11 connector on the rear panel of the M505N.
Connect the other end to the ADSL outlet provided by your service provider (normally MODEM
port of the included splitter).
Step 2. Connect the Ethernet cable
Connect one end of the Ethernet cable to the RJ-45 connectors on the rear panel of the M505N and