User manual

Manual Ver1.0
- 45 -
14. Appendix A – Specifications
A1. Hardware Specifications
 Local Interface
• Four 10/100BaseT Ethernet port (IEEE 802.3, RJ-45 connector)
• Two Removable External Wireless Antenna (Supports B/G/N mode)
• USB 2.0 Type A Interface
 WAN ADSL Line Interface
• Complies with G.dmt (G.992.1) Annex A
• Complies with G.lite (G.992.2) and T1.413
• Complies with ADSL2 (G.992.3)
• Complies with ADSL2+ (G.992.5)
• Connector: RJ-11
 OAM&P
• Remote: Telnet, SSH or Web browser
 Environment
• Operation Temperature: 0°C ~ 40°C
• Operation Humidity: 10% ~ 95%
• Storage Temperature: -20 ~ 70°C
• Storage Humidity: 5%~95%
 Power
• AC Adapter :Input 100-240V AC50/60Hz; Output 12VDC 1A
 Certificates
• FCC Part 68 and 15 Class B, UL
A2. Software Specifications
 ATM
• ATM Cell over ADSL, AAL5
• Supports UBR, CBR & VBR-nrt
• VPI Range (0-255) and VCI range (1-65535)
• Supports up to 8 PVCs
• Supports OAM F4/F5, and loop back cells
• Payload Encapsulation --
− RFC2684 (RFC1483), multi-protocol over ATM
− RFC2364, PPP over ATM (CHAP and PAP supported)
− RFC2516, PPPoE (PPP over Ethernet) over ATM
 Bridging
• Transparent Bridging (IEEE 802.1D)
• RFC2684 (RFC1483) Bridged
• Spanning Tree Protocol (IEEE 802.1D)
• Bridge Filtering
 Routing
• IP Address Forwarding
• MAC Encapsulated Routing
• Routing Information Protocol (RIP) v1, v2
•
DHCP Client (to the DSL network)
•
DHCP relay agent
• NAT/PAT – RFC1631 (basic Firewall support)
• Support Point-to-Point Protocol (PPP)
• PAP for user authentication