User manual

Manual Ver1.0
- 32 -
10.3 – WPS (Wireless Security Settings)
This page is used to configure the settings for WPS (Wi-Fi Protected Setup). It uses a
push-button or a 4- or 8-digit personal identification number (PIN) to simplify the secure
network setup.
With WPS, M505N can automatically set the SSID or network name as part of the setup
process and provide strong encryption keys to client devices. You do not need to configure
SSID, wireless security setting, etc., in the client software. In order to use WPS, the
wireless client software must also support WPS.
10.4 – MAC Filter
Wireless MAC filter allows you to implement access control based on device’s MAC
address.
When you select “Allow” in “MAC Restrict Mode”, only data from devices with matching
MAC addresses in filter table can access the M505N. If you select “Deny” in “MAC
Restrict Mode”, every device can access the M505N except those which have matching
MAC addresses in the filter table. To add filter entry, click on “Add” and enter the MAC
address of the M505N. Click “Save/Apply” to save the configuration. To “delete” the entry,
select the entry and click “Remove”.