User manual

Manual Ver1.0
- 30 -
WPA/WPA2-PSK
WPA-PSK lets you take advantage of WPA without the hassle of setting up your own
RADIUS server. To enable WPA-PSK, select “WPA-PSK” in “Network Authentication”.
Enter 8 to 63 ASCII codes or 64 hexadecimal (0~9, A~F) digits in “WPA Pre-Shared Key”.
Click “Save/Apply” to save the configuration.
*Note – You must also input the WPA Pre-Shared Key on the client side (i.e. Wireless
Laptop, Desktop, Game Consoles, etc.) to be able to connect to the modem. Please contact
the manufacturer of your device for more information.