User manual

Manual Ver1.0
- 28 -
26 hexadecimal digits for 128-bit encryption keys. Enter 5 ASCII characters or 10
hexadecimal digits for 64-bit encryption keys. Select which key (1 ~ 4) to use from
“Current Network Key”. Click “Save/Apply” to save the configuration.
802.1X
802.1X addresses the WEP weakness by adding user authentication, via RADIUS server.
So you need to have your RADIUS server up and running before using 802.1X. To enable
802.1X, select “802.1X” in “Network Authentication”. Enter your RADIUS server IP
address, port number (default: 1812), and key. Follow the WEP security section to
configure your WEP key and select “Save/Apply” to save your configuration.