User manual

Manual Ver1.0
- 12 -
6. Security
The Security section allows the following setting to be configured on the VisionNet
M505N Gateway:
 IP Filtering Rules
 URL Filtering
 Port Forwarding
 Port Triggering
 DMZ Host
 WAN Access Control
6.1 – IP Filtering Rules
Two functions are supported in the IP Filter function of the M505N Gateway: Outgoing
IP Filtering and Incoming Filtering.
Incoming IP Filtering
When the firewall option is enabled on a WAN or LAN interface, all incoming IP traffic
from the WAN is BLOCKED. However, incoming IP filter rules can be allowed by setting
up filtering rules. Choose “Add” to configure incoming IP filters. To remove, check the
item and click “Remove”.