User’s manual SL80108 DECT 6.
Congratulations on your purchase of this AT&T product. Please read this user’s manual for the information necessary to install your new AT&T product. For complete instructions, please refer to the manual provided with your SL81108/SL81208/SL82118/ SL82218/SL82318/SL82418/SL82518/SL82558/ SL82658 telephone. For customer service or product information, please visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: SL80108 Type: DECT 6.
Parts checklist Your telephone contains the following items. User’s manual SL80108 DECT 6.
User’s manual SL80108 DECT 6.0 expansion handset for use with AT&T models SL81108/SL81208/SL82118/ SL82218/SL82318/SL82418/ SL82518/SL82558/SL82658 Table of contents Getting started Quick reference guide................1 Installation preparation..............3 Charger installation......................4 Battery installation & charging.......................................5 Adding and registering handsets......................................8 Replacing a handset.................
Getting started Quick reference guide MENU/SELECT CHARGE indicator Press to display the menu. While in the menu, press to select an item or save an entry or setting. On when the handset is charging in the telephone base or charger. DIR/ CID Press DIR to display directory entries. Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press CID to display caller ID history. Press to scroll down while in menus.
Getting started Quick reference guide Feature menu The > symbol highlights a menu item. Feature menu DIRECTORY CALL LOG RINGER VOLUME RINGER TONE KEY TONE LANGUAGE CLR VOICEMAIL >DIRECTORY CALL LOG Menu Using menus Press items. or to scroll through menu Press MENU/SELECT to select or save changes to a highlighted menu item. Press OFF/CLEAR to cancel an operation, back up to the previous menu, or exit the menu display.
Getting started Installation preparation You must install and charge the battery before using the telephone. STOP! See pages 5-7 for easy instructions. Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Getting started Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapters are intended to be correctly oriented in a vertical or floor mount position.
Getting started Battery installation & charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 27 for battery operating times.
Getting started Battery installation & charging THIS SIDE UP MADE IN MADE INCHINA CHINA Battery Pack THIS SIDE UP BT18433 / BT28433 Battery Pack BT18433 / BT28433 2.4V 500mAh Ni-MH 2.4V 500mAh Ni-MH WARNING: DO NOT BURN OR WARNING: DO NOT BURN OR PUNCTURE BATTERIES PUNCTURE BATTERIES CHARGE light Step 1 Plug the battery securely into the connector inside the handset battery compartment, matching the colorcoded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated.
Getting started Battery installation & charging To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Getting started Adding and registering handsets Before using a new SL80108 handset, you must register it with the SL81108/SL81208/SL82118/SL82218/SL82318/SL82418/ SL82518/SL82558/SL82658 telephone base (purchased separately). The SL81108/SL81208/SL82118/SL82218/SL82318/ SL82418/SL82518/SL82558/SL82658 telephone can accommodate up to twelve cordless handsets. The handset provided with your SL81108/SL82118 is automatically registered as handset 1.
Getting started Adding and registering handsets NOT REGISTERED When first purchased, all optional accessory handsets will show NOT REGISTERED on the screen. The new handset(s) may need to be charged for five minutes before registering to the telephone base. To register a handset to your telephone base PRESS HNDST LOC 4 SEC ON BASE PLEASE WAIT... HS X REGISTERED 1. Make sure your handset battery is properly installed and charged (pages 5-7). 2. Place the unregistered handset into the telephone base.
Getting started Replacing a handset You may need to deregister your handsets if: You have twelve registered handsets and need to replace a handset. -ORYou wish to change the designated handset number of your registered handsets. You must first deregister ALL the handsets, and then re-register each handset you wish to use. Please read carefully through all the instructions on this page before beginning the deregistration process. To deregister all handsets 1.
Getting started Replacing a handset To deregister all handsets 4. To re-register the handset(s) to the telephone base, follow the registration instructions on page 9. NOTES: 1. If the deregistration process was not successful, you may need to reset the system and try again. To reset: pick up the handset and press the PHONE/FLASH button, then press the OFF/CLEAR button and place the handset back into the telephone base.
Getting started Belt clip & optional headset Installation Snap the belt clip into the notches on both sides of handset. Removal Pull and unlock one flap from the notch first before detaching the whole belt clip from the handset. For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111.
Appendix A Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water • Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
Appendix B Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Appendix B Important safety information • Replace batteries only as described in your user’s manual (pages 6-7). Do not burn or puncture batteries — they contain caustic chemicals. • This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet. Caution: Use only the power adapter provided with this product.
Appendix B Important safety information • Rechargeable batteries: This product contains either nickelcadmium or nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. • Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner.
Appendix B Important safety information PACEMAKER PATIENTS • Should keep wireless telephones at least six inches from the pacemaker. • Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. • Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.
Appendix C FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Appendix C FCC Part 68 and ACTA If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC.
Appendix C FCC Part 68 and ACTA Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.1.
Appendix D FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix D FCC Part 15 To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user.
Appendix E Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. 1.
Appendix E Limited warranty 3. How long is the limited warranty period? The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase.
Appendix E Limited warranty • Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 5. How do you get warranty service? To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT controls and features may save you a service call.
Appendix E Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties.
Appendix F Technical specifications RF frequency band 1921.536 MHz — 1928.448 MHz Channels 5 Operating temperature 32°F — 122°F 0°C — 50°C Handset voltage 2.2 — 3.0 VDC Charger voltage (AC adapter output) 6VAC @300mA Replacement battery 2.4V 600mAH DECT 6.0 digital technology This technology digitally transmits your voice across multiple channels using the newly available DECT 6.0 frequency band.
Appendix G Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com, or call 1 (800) 222–3111. In Canada dial 1 (866) 288-4268. My phone doesn’t work at all • Make sure the power cord is securely plugged in. • Make sure that the battery connector is securely plugged into the cordless handset.
Appendix G Troubleshooting • If the previous suggestions don’t work, disconnect the telephone base from the telephone jack and connect to a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your telephone service provider. • Your line cord might be malfunctioning. Try installing a new line cord. I cannot dial out • First try all the suggestions above. • Make sure you have a dial tone before dialing.
Appendix G Troubleshooting My cordless handset isn’t performing normally • Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different, working electrical outlet not controlled by a wall switch. • Move the cordless handset closer to the telephone base. You might have moved out of range. • Reset the telephone base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in.
Appendix G Troubleshooting • Reset the telephone base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. • Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.
Appendix G Troubleshooting I get noise, static, or weak signal even when I’m near the telephone base • If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
Appendix G Troubleshooting • Relocate your phone to a higher location. The phone will likely have better reception when not installed in a low area. • If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply). I hear other calls while using my phone • Disconnect the telephone base from the telephone jack, and plug in a different telephone.
Appendix G Troubleshooting • You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. • The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably on an upper floor. • If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply).
Appendix G Troubleshooting My calls fade out or cut in and out while I’m using my cordless handset • Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from the following electronic devices as possible: television sets, VCRs, or other cordless telephones. • Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.
Appendix G Troubleshooting • Clean the cordless handset and telephone base charging contacts each month using a pencil eraser or cloth. My caller ID isn’t working • Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. • Your caller must be calling from an area that supports caller ID. • Both you and your caller’s telephone companies must use caller ID compatible equipment.
Appendix G Troubleshooting I cannot retrieve voicemail messages. • Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently. If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail.
www.telephones.att.com © 2008-2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 6 AT&T 10/09.