User`s manual

EDIT

Cut Cut a block of text

Paste Paste a block of text

Copy Copy a block of text

Find/Replace Find and replace text

Most simple editing can be accomplished by using the Backspace key and the

Del/Ins keys. When you need to change larger blocks of text, use the block

editing features. The EDIT menu is for editing blocks of text.

Defining a Block

The first step in block editing is to define or mark a block of text. To define a

block, place the cursor at the first character of the block you want to edit and

hold down shift key button or the left mouse button and move the cursor point

at the same time. When the cursor is at the end of the area you want to mark

as a block, release the shift key or the left mouse button. After a block of text

is defined, use one of the three block editing tools: cut block, paste block, copy

block.

Cutting a Block

To cut a block of text, first define the block and select the Cut icon from the

EDIT menu.

The block will be removed from its current position and will be placed in memory.

You can paste the block in any location in the document.

Pasting a Block

After you have used the Cut or Copy option, move the cursor to the position

where you want the block of text to be pasted. Select the Paste icon from the

EDIT menu and the block of text you defined will be pasted to the selected location.

Copy a Block

To copy a block of text, first define the block and select the Copy icon from

the EDIT menu. The block will be placed in memory. You can now add a copy

of the block into any position within the text.

Find/Replace

You can use this command to find specific text and replace it with new text.

TOOLS

Spell checker

The spell checker checks a word to see if it is spelled correctly. To check the

spelling of a word, move the cursor to the beginning of the word and select Spell

Check from the TOOLS menu. If the word does not exist in the Spell Check

Untitled-3 10/16/01, 2:37 PM22