User`s manual

New

New is the command to create a new file. Select New from the FILE menu

icon and it will ask whether you want to save the current file. If you type “Y”,

it will save the file. If you type “N”, It will create a new file.

Open

Open is the command used to retrieve an existing file. Select Open from the

FILE menu and it will list out all the files. Select the file you want to retrieve

and press the Enter key or the left mouse button. The selected file will then

appear on the screen.

Save

Saving a file is a very important option in Word Processor because if you forget

to save the file, you will not have the ability to retrieve the file and continue to

work on it.

In order to save a file, select Save from the FILE menu and it will show a save

box. The unit will prompt you with the file name. You need to type in a name

and then press the Enter key to save the file or revise the name before pressing

the Enter key to confirm. Please note that the file name should be no longer

than 8 characters.

Save as

You can save the document under a different name.

Delete

When you no longer need a file, erasing it is a good idea. Select Delete from

the FILE menu and it will show a delete box. Then select the cartridge icon

to delete a file from the RAM cartridge or the main unit icon to delete a file

from the main unit. After you select the source, it will list all the files. Select

the file you want to delete and press the Enter key or the left mouse button

to confirm. A message will ask you for confirmation. ALERT! When files are

deleted, they will be gone permanently.

In order to use the print feature, you must connect the unit to one of the printers

which works with the VTECH

Power Zone™ 2000 learning aid. Please see

the list of compatible printers listed in the Printer Setup window. It is wise to

save your file before printing. Select Print from the FILE menu and it will print