Installation guide
Synapse Installation Guide 38 [Headset] TL7600 Cordless Headset Installation
[Headset] TL7600 Cordless Headset Installation
[Headset] Charger Installation
To install the TL7600 Charger:
Figure 43. Charger Installation
1. Plug the small end of the Charger power adapter into the jack on the underside
of the Charger, then route the cord through the slot as shown in Figure 43.
2. Plug the large end of the Charger power adapter into an AC wall outlet not
controlled by a wall switch.
AC
Outlet
Power
Jack