Installation guide

Synapse Installation Guide 37 [Handset] SB67040 Cordless Handset Installation
[Handset] Low Battery Notification
When the battery is low, the Handset emits an alert tone and displays the notification screen shown in Figure 42.
[Handset] Power Save Mode
If you are not on an active call and press no keys for 30 seconds, the system goes into Power Save mode.
 In this mode, the backlight turns off.
 Press any key to end Power Save mode.
 To handle low battery notification:
Figure 42. Low Battery
1. Press to exit the notification screen.
2. Place the Handset into the Charger.
12:30p Feb 23
2 Missed Calls
5 New MSGs
EXT 249
John Smith
Low Battery.
Please place in
charger.
IGNORE
NOTE: If the Handset stops working when you are on a call because of low
battery charge, that call is auto-held on the Deskset.