Installation guide

Synapse Installation Guide 25 [ATA] Optional ATA Installation
[ATA] Optional ATA Installation
Installation of the ATA chassis is similar to that of the PSTN Gateway. See “Gateway Installation” on page 13, or you can install
the ATA in another location. See “ATA Placement Considerations” on page 12.
Additional grounding may be necessary to protect against uneven resistance among the third-party equipment and Synapse,
which may cause Synapse phones to be noisy. To provide additional grounding, the ATA chassis provides a grounding screw, as
shown in Figure 29.
Figure 29. ATA Back Panel
Grounding Screw