Installation guide

Synapse Installation Guide 22 Deskset Installation
 To connect the RJ-45 Ethernet cable to the Deskset: (Continued)
 Without a PC
If the Deskset has a dedicated network connection, then connect the Deskset to the network connection only.
1. Plug an RJ-45 Ethernet cable into the Network port on the back of the Deskset, as indicated in Figure 23 on page 21.
2. Plug the other end into the Ethernet wall jack.
 To connect power:
Figure 24. Power Connector
1. Plug the power adapter (blue tag) into the DC Power jack
on the back of the Deskset, as identified in Figure 24 and
on the Deskset by a blue dot.
2. Plug the power adapter into an outlet not controlled by a
wall switch. The display screen illuminates within about a
minute.
If the user's computer is plugged into a universal
power supply (UPS), consider plugging the Deskset
into it, too..
Power Jack