Installation guide

Synapse Installation Guide 19 Deskset Installation
To attach the Desktop Stand for desktop installation:
Figure 17. Deskset Stand Options
Figure 18. Deskset Stand Installation
1. Select a Deskset position. The desktop setup requires the
Deskset Stand and provides two positions, Option 1 at 45°
and Option 2 at 60°, as shown in Figure 17. If you use
Option 2, rotate the Handset tab as explained in “To
rotate the Handset tab for wall and Deskset Option 2
installation:” on page 20
2. Place the Deskset on a flat surface with the power and
network ports facing you, as illustrated in Figure 18.
3. Place the stand,
illustrated in
Figure 19, on the
base with the
flexible tab side
away from you.
4. Insert the solid
tabs of the stand
into the Option 1
or Option 2 slots
on the base that are marked in red in Figure 18.
5. Rotate the stand away from you until it rests against the
base and you hear a click as the flexible tabs lock into
place.
Option 1 Option 2
Option 1
Option 2
Slots for Flexible Tabs
Slots for Solid Tabs
Figure 19. Deskset Stand Tabs
Flexible Tabs