Installation guide

Synapse Installation Guide 11 System Installation Overview
[ATA] System Installation Overview with Optional ATA
If you have third-party devices that you want to attach to the System, you will need an AT&T SB67050 Analog Terminal Adapter
(ATA). The ATA allows you to attach hardware such as overhead paging equipment, a fax machine, or a source for Music On Hold
to Synapse. Figure 7 illustrates this more complex installation (blue lines = telephone; red lines = Ethernet; orange line = audio).
Install the ATA after you have installed the PSTN Gateway and the Desksets.
Figure 7. Example of a system featuring an ATA
Deskset GatewayLocal Area Network (LAN) PSTN Plug
Music on
Hold
Source
Overhead
Paging
System
Fax Machine
ATA